Filter
Top Products
73-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 73 Conference Bridge Configuration
Hardware Conference Bridge Configuration Settings
Note The hardware model type for Conference Bridge contains a specific Media Access Control (MAC)
address and device pool information.
Refer to the “Conference Bridges” chapter of the Cisco Unified Communications Manager System Guide
for more information about conference bridges.
Before you configure a conference bridge, configure the device pools. See the “Deleting a Device Pool”
section on page 9-13.
Table 73-2 describes the hardware conference bridge configuration settings. For related procedures, see
the “Related Topics” section on page 73-18.
Table 73-2 Hardware Conference Bridge Configuration Settings
Field Description
Conference Bridge Type Choose Cisco Conference Bridge Hardware.
For a description of this type, refer to the “Conference Bridge Types in
Cisco Unified Communications Manager Administration” section of the
Cisco Unified Communications Manager System Guide.
MAC Address Enter a unique device MAC address in this required field. MAC
addresses comprise 12 hexadecimal digits (0-9, A-F).
Example
1231123245AB
Description This field automatically generates from the MAC address that you
provide. You can update this field if you choose.
Device Pool Choose a device pool that has the highest priority within the Cisco
Unified Communications Manager group that you are using or choose
Default.
Common Device
Configuration
Choose the common device configuration to assign to the conference
bridge. The common device configuration includes attributes, such as
MOH audio source, that support features and services for phone users.
Device configurations that are configured in the Common Device
Configuration window display in the drop-down list. See
Common
Device Configuration for more information.