Filter
Top Products
41-6
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 41 Route Filter Configuration
Synchronizing a Route Filter With Affected Devices
Additional Information
See the “Related Topics” section on page 41-10.
Synchronizing a Route Filter With Affected Devices
To synchronize devices with a route filter that has undergone configuration changes, perform the
following procedure, which will apply any outstanding configuration settings in the least-intrusive
manner possible. (For example, a reset/restart may not be required on some affected devices.)
Procedure
Step 1 Choose Call Routing > Route Filter.
The Find and List Route Filters window displays.
Step 2 Choose the search criteria to use.
Step 3 Click Find.
The window displays a list of route filters that match the search criteria.
Step 4 Click the route filter to which you want to synchronize applicable devices. The Route Filter
Configuration window displays.
Step 5 Make any additional configuration changes.
Step 6 Click Save.
Step 7 Click Apply Config.
The Apply Configuration Information dialog displays.
Note Any necessary resetting of devices that are associated with the route filter causes calls on
affected gateways to drop.
Step 8 Click OK.
Additional Information
See the “Related Topics” section on page 41-10.
Deleting a Route Filter
The following procedure describes how to delete a route filter.
Before You Begin
You cannot delete a route filter that route patterns/hunt pilots, translation patterns, or other items use. To
find out which route patterns/hunt pilots, translation patterns, or other items are using the route filter, in
the Route Filter Configuration window, choose Dependency Records from the Related Links
drop-down list box and click Go. If the dependency records are not enabled for the system, the
Dependency Records Summary window displays a message. For more information about dependency