Filter
Top Products
48-4
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 48 SIP Route Pattern Configuration
SIP Route Pattern Configuration Settings
Calling Line Name
Presentation
Cisco Unified Communications Manager uses calling name presentation
(CNIP/CNIR) as a supplementary service to allow or restrict the
originating caller name on a call-by-call basis.
Choose whether you want the Cisco Unified Communications Manager
to allow or restrict the display of the calling party name on the called
party phone display for this SIP route pattern.
Choose Default if you do not want to change calling name presentation.
Choose Allowed if you want Cisco Unified Communications Manager
to display the calling name information. Choose Restricted if you want
Cisco Unified Communications Manager to block the display of the
calling name information.
For more information about this field, see Table 17-8 in the “Calling
Party Number Transformations Settings” section in the Cisco Unified
Communications Manager System Guide.
Connected Party Transformations
Connected Line ID
Presentation
Cisco Unified Communications Manager uses connected line ID
presentation (COLP/COLR) as a supplementary service to allow or
restrict the called party phone number on a call-by-call basis.
Choose whether you want Cisco Unified Communications Manager to
allow or restrict the display of the connected party phone number on the
calling party phone display for this SIP route pattern.
Choose Default if you do not want to change the connected line ID
presentation. Choose Allowed if you want to display the connected party
phone number. Choose Restricted if you want Cisco Unified
Communications Manager to block the display of the connected party
phone number.
For more information about this field, see Table 17-11 in the
“Connected Party Presentation and Restriction Settings” section in the
Cisco Unified Communications Manager System Guide.
Connected Line Name
Presentation
Cisco Unified Communications Manager uses connected name
presentation (CONP/CONR) as a supplementary service to allow or
restrict the called party name on a call-by-call basis.
Choose whether you want Cisco Unified Communications Manager to
allow or restrict the display of the connected party name on the calling
party phone display for this SIP route pattern.
Choose Default if you do not want to change the connected name
presentation. Choose Allowed if you want to display the connected party
name. Choose Restricted if you want Cisco Unified Communications
Manager to block the display of the connected party name.
For more information about this field, see Table 17-11 in the
“Connected Party Presentation and Restriction Settings” section in the
Cisco Unified Communications Manager System Guide.
Table 48-1 SIP Route Pattern Configuration Settings (continued)
Field Description