Filter
Top Products
47-9
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 47 Hunt Pilot Configuration
Hunt Pilot Configuration Settings
Connected Party Transformations
Connected Line ID
Presentation
Cisco Unified Communications Manager uses connected line ID
presentation (COLP/COLR) as a supplementary service to allow or
restrict the called party phone number on a call-by-call basis.
Choose whether you want Cisco Unified Communications Manager to
allow or restrict the display of the connected party phone number on the
calling party phone display for this hunt pilot.
Choose Default if you do not want to change the connected line ID
presentation. Choose Allowed if you want to display the connected party
phone number. Choose Restricted if you want Cisco Unified
Communications Manager to block the display of the connected party
phone number.
For more information about this field, see Table 17-11 in the “Connected
Party Presentation and Restriction Settings” section in the Cisco Unified
Communications Manager System Guide.
Connected Name
Presentation
Cisco Unified Communications Manager uses connected name
presentation (CONP/CONR) as a supplementary service to allow or
restrict the called party name on a call-by-call basis.
Choose whether you want Cisco Unified Communications Manager to
allow or restrict the display of the connected party name on the calling
party phone display for this hunt pilot.
Choose Default if you do not want to change the connected name
presentation. Choose Allowed if you want to display the connected party
name. Choose Restricted if you want Cisco Unified Communications
Manager to block the display of the connected party name.
For more information about this field, see Table 17-11 in the “Connected
Party Presentation and Restriction Settings” section in the Cisco Unified
Communications Manager System Guide.
Called Party Transformations
Discard Digits From the Discard Digits drop-down list box, choose the discard digits
instructions that you want to associate with this hunt pilot. The discard
digits that display depend on the numbering plan that you choose from
the Numbering Plan drop-down list box. See the
“Discard Digits
Instructions” section in the Cisco Unified Communications Manager
System Guide for more information on discard instructions for the North
American Numbering Plan.
Note The called party transformation settings that are assigned to the
line groups in a hunt list override any called party transformation
settings that are assigned to a hunt pilot that is associated with
that hunt list.
Called Party Transform
Mask
Enter a transformation mask value. Valid entries for the NANP include
the digits 0 through 9; the wildcard characters X, asterisk (*), and
octothorpe (#); the international escape character +; and blank. If the
field is blank, no transformation takes place. Cisco Unified
Communications Manager sends the dialed digits exactly as dialed.
Table 47-1 Hunt Pilot Configuration Settings (continued)
Field Description