Filter
Top Products
CHAPTER
60-1
Cisco Unified Communications Manager Administration Guide
OL-18611-01
60
Translation Pattern Configuration
Use the following topics to add, update, copy, or delete a translation pattern:
• Translation Pattern Configuration Settings, page 60-1
• Finding a Translation Pattern, page 60-9
• Configuring a Translation Pattern, page 60-10
• Deleting a Translation Pattern, page 60-11
Translation Pattern Configuration Settings
Cisco Unified Communications Manager uses translation patterns to manipulate dialed digits before it
routes a call. In some cases, the system does not use the dialed number. In other cases, the public
switched telephone network (PSTN) does not recognize the dialed number.
Table 60-1 describes the available fields in the Translation Pattern Configuration window. For related
procedures, see the “Related Topics” section on page 60-12.
Table 60-1 Translation Pattern Configuration Settings
Field Description
Pattern Definition
Translation Pattern Enter the translation pattern, including numbers and wildcards (do not
use spaces), in the Translation Pattern field. For example, for the NANP,
enter 9.@ for typical local access or 8XXX for a typical private network
numbering plan. Valid characters include the uppercase characters A, B,
C, and D and \+, which represents the international escape character +. If
you leave this field blank, you must select a partition from the Partition
drop-down list box.
Note Ensure that the translation pattern, which uses the chosen
partition, route filter, and numbering plan combination, is
unique. Check the route pattern/hunt pilot, translation pattern,
directory number, call park number, call pickup number, or
meet-me number if you receive a message that indicates duplicate
entries. Alternatively, check the route plan report if you receive
a message that indicates duplicate entries.