Filter
Top Products
41-5
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 41 Route Filter Configuration
Removing Route Filter Clauses
Step 4 Choose the route filter tags and operators and enter data, where appropriate, to create an additional
clause for this route filter.
Note For help with entering data for route filter tags and operators for the North American Numbering
Plan, see the “Route Filter Tag Descriptions” section on page 41-7.
Step 5 To add the clause, click Save.
The new clause displays below the existing clauses in the window. (Scroll down, if necessary, to view
the new information.)
Step 6 If you want to edit an existing route filter clause, click the Edit Clause button directly above the route
filter clause that you want to edit. The Route Filter Clause Configuration window opens to display the
current definition of the route filter clause that you chose.
Step 7 Modify the route filter tags and operators and enter data, where appropriate, to edit the route filter clause
that you chose to edit.
Note For help with entering data for route filter tags and operators for the North American Numbering
Plan, see the “Route Filter Tag Descriptions” section on page 41-7.
Step 8 To save your changes to this route filter clause, click Save.
Additional Information
See the “Related Topics” section on page 41-10.
Removing Route Filter Clauses
You can remove route filter clauses either when setting up a new route filter or when updating an existing
route filter. This procedure describes removing a route filter clause from an existing route filter.
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Call Routing > Route Filter.
Step 2 Locate the route filter from which you want to remove route filter clauses.
Step 3 Scroll down to the top of the clause that you want to remove and click Remove Clause.
A dialog box appears that warns you that you cannot undo the removal of this route filter clause.
Caution Each Remove Clause button applies to the clause immediately below the button. Check carefully to
ensure that you are removing the correct clause before initiating this action. If you accidentally remove
a clause, you cannot retrieve it, and you must rebuild it.
Step 4 To remove the clause, click OK or to cancel the action, click Cancel. If you click OK, Cisco Unified
Communications Manager removes the clause from the route filter.