Filter
Top Products
9-7
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 9 Device Pool Configuration
Device Pool Configuration Settings
National Number Configure the following settings to globalize calling party numbers that
use National for the Calling Party Number Type.
• Prefix—Cisco Unified Communications Manager applies the
prefix that you enter in this field to calling party numbers that use
National for the Calling Party Numbering Type. You can enter up
to 8 characters, which include digits, the international escape
character (+), asterisk (*), or the pound sign (#). You can enter the
word, Default, instead of entering a prefix.
If the word, Default, displays in the Prefix field, Cisco Unified
Communications Manager applies the service parameter
configuration for the incoming calling party prefix, which supports
both the prefix and strip digit functionality.
• Strip Digits—Enter the number of digits, up to the number 24, that
you want Cisco Unified Communications Manager to strip from
the calling party number of National type before it applies the
prefixes.
• Calling Search Space—This setting allows you to globalize the
calling party number of National calling party number type on the
device. Make sure that the calling search space that you choose
contains the calling party transformation pattern that you want to
assign to this device.
Before the call occurs, the device must apply the transformation by
using digit analysis. If you configure the CSS as None, the
transformation does not match and does not get applied. Ensure
that you configure the calling party transformation pattern in a
non-null partition that is not used for routing.
Tip For more information on configuring these settings, see
“Configuring the Incoming Calling Party Settings in the Device
Pool, Gateway, or Trunk Configuration Windows” in the Cisco
Unified Communications Manager Features and Services
Guide.
Table 9-1 Device Pool Configuration Settings (continued)
Field Name Description