Filter
Top Products
90-104
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Related Topics
Updating Gateways and Ports
Complete the following steps to update a gateway or reconfigure gateway ports from Cisco Unified
Communications Manager.
Procedure
Step 1 Choose Device > Gateway.
The Find and List Gateways window displays.
Step 2 To locate a specific gateway, enter search criteria.
Step 3 Click Find.
A list of discovered devices displays.
Step 4 Click the Device Name of the gateway that you want to update.
The Gateway Configuration window displays.
Step 5 Update the appropriate gateway or port settings as described in the following sections.
To access gateway ports, click the icon of the gateway port or the MGCP endpoint link on the left side
of the configuration window for the chosen gateway.
• MGCP Gateway Configuration Settings, page 90-2
• FXS/FXO Port Configuration Settings, page 90-31
• Digital Access PRI Port Configuration Settings, page 90-39
• Digital Access T1 Port Configuration Settings, page 90-62.
• Analog Access Gateway Configuration Settings, page 90-22
• Finding Specific Gateways, page 90-88
Step 6 Click Save.
Step 7 To apply the changes, click Reset to reset the gateway.
Additional Information
See the “Related Topics” section on page 90-104.
Related Topics
All Gateway Types
• Adding Gateways to Cisco Unified Communications Manager, page 90-89
• Gateway Configuration Settings, page 90-2
• Finding Specific Gateways, page 90-88
• Using Dependency Records, page 90-101
• Modifying Gateways and Ports, page 90-101
• Deleting Gateways, page 90-101
• Resetting and Restarting Gateways, page 90-102