Filter
Top Products
69-3
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 69 Called Party Transformation Pattern Configuration
Called Party Transformation Pattern Configuration Settings
Route Filter If your transformation pattern includes the @ wildcard, you may choose a
route filter. The optional act of choosing a route filter restricts certain number
patterns.
The route filters that display depend on the numbering plan that you choose
from the Numbering Plan drop-down list box.
You can configure the number of items that display in this drop-down list box
by using the Max List Box Items enterprise parameter. If more route filters
exist than the Max List Box Items enterprise parameter specifies, the Find
button displays next to the drop-down list box. Click the Find button to display
the Find and List Route Filters window. Find and choose a route filter name by
using the
Finding a Route Filter procedure in the Cisco Unified
Communications Manager Administration Guide.
Note To set the maximum list box items, choose System > Enterprise
Parameters and choose CCMAdmin Parameters.
Urgent Priority Cisco Unified Communications Manager sets all called party transformation
patterns with urgent priority, and you cannot change the priority of the
patterns.
Called Party Transformations
Discard Digits Choose the discard digits instructions that you want to be associated with this
called party transformation pattern. The discard digits that display depend on
the numbering plan that you choose from the Numbering Plan drop-down list
box.
Called Party
Transform Mask
Enter a transformation mask value. Valid entries for the NANP include the
digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#);
the international escape character +; and blank. If this field is blank and the
preceding field is not checked, no transformation takes place.
Prefix Digits Enter prefix digits in the Prefix Digits (Outgoing Calls) field. Valid entries for
the NANP include the digits 0 through 9, the wildcard characters asterisk (*)
and octothorpe (#), the international escape character +, and blank.
Note The appended prefix digit does not affect which directory numbers get
routed to the assigned device.
Table 69-1 Called Party Transformation Pattern Configuration Settings (continued)
Field Description