Filter
Top Products
90-15
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Gateway Configuration Settings
Caller ID DN Enter the pattern that you want to use for calling line ID, from 0 to 24
digits.
For example, in North America
• 555XXXX = Variable calling line ID, where X equals an extension
number. The CO appends the number with the area code if you do
not specify it.
• 5555000 = Fixed calling line ID. Use when you want the Corporate
number to be sent instead of the exact extension from which the
call is placed. The CO appends the number with the area code if
you do not specify it.
You can also enter the international escape character +.
Display IE Delivery Check the check box to enable delivery of the display IE in SETUP,
CONNECT, and NOTIFY messages for the calling and called party
name delivery service.
Redirecting Number IE
Delivery—Outbound
Check this check box to indicate the first redirecting number and the
redirecting reason of the call when the call is forwarded. (The UUIE
part of the outgoing SETUP message from the Cisco Unified
Communications Manager includes the Redirecting Number IE.)
Uncheck the check box to exclude the first redirecting number and the
redirecting reason.
You use Redirecting Number IE for voice-messaging integration only.
If your configured voice-messaging system supports Redirecting
Number IE, you should check the check box.
Enable Outbound FastStart Check this check box to enable the H.323 FastStart feature on outgoing
calls.
By default, the check box remains unchecked for the H.323 gateway or
trunk.
Note When you check the Enable Outbound FastStart check box, you
must set the Media Termination Point Required, Media
Resource Group Lists, and Codec for Outbound FastStart.
Table 90-2 H.323 Gateway Configuration Settings (continued)
Field Description