Filter
Top Products
101-6
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 101 SIP Profile Configuration
SIP Profile Configuration Settings
Call Hold Ring Back If you have a call on hold and are talking on another call, when you hang
up the call, this parameter causes the phone to ring to let you know that
you still have another party on hold. Valid values follow:
• Off permanently and cannot be turned on and off locally by using the
user interface.
• On permanently and cannot be turned on and off locally by using the
user interface.
Anonymous Call Block This field configures anonymous call block. Valid values follow:
• Off—Disabled permanently and cannot be turned on and off locally
by using the user interface.
• On—Enabled permanently and cannot be turned on and off locally
by using the user interface.
Caller ID Blocking This field configures caller ID blocking. When blocking is enabled, the
phone blocks its own number or e-mail address from phones that have
caller identification enabled. Valid values follow:
• Off—Disabled permanently and cannot be turned on and off locally
by using the user interface.
• On—Enabled permanently and cannot be turned on and off locally
by using the user interface.
Do Not Disturb Control This field sets the Do Not Disturb (DND) feature. Valid values follow:
• User—The dndControl parameter for the phone should specify 0.
• Admin—The dndControl parameter for the phone should specify 2.
Telnet Level for 7940 and
7960
Cisco Unified IP Phones 7940 and 7960 do not support ssh for login
access or HTTP that is used to collect logs; however, these phones
support Telnet, which lets the user control the phone, collect debugs, and
look at configuration settings. This field controls the telnet_level
configuration parameter with the following possible values:
• Disabled (no access)
• Limited (some access but cannot run privileged commands)
• Enabled (full access)
Timer Keep Alive Expires
(seconds)
Cisco Unified Communications Manager requires a keepalive
mechanism to support redundancy. This field specifies the interval
between keepalive messages that are sent to the backup Cisco Unified
Communications Manager to ensure that it is available in the event that a
failover is required.
Timer Subscribe Expires
(seconds)
This field specifies the time, in seconds, after which a subscription
expires. This value gets inserted into the Expires header field. Valid
values include any positive number; however, 120 specifies the default
value.
Table 101-1 SIP Profile Configuration Settings (continued)
Field Description