Filter
Top Products
90-35
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Port Configuration Settings
Geolocation From the drop-down list box, choose a geolocation.
You can choose the Unspecified geolocation, which designates
that this device does not associate with a geolocation.
You can also choose a geolocation that has been configured with
the System
> Geolocation Configuration menu option.
For an explanation of geolocations, including configuration
details, refer to
“Introducing Geolocations” and “Geolocation
Configuration” in the “Geolocations and Location Conveyance”
chapter in the Cisco Unified Communications Manager Features
and Services Guide.
For an overview and details of how logical partitioning uses
geolocations, refer to the
“Logical Partitioning” chapter in the
Cisco Unified Communications Manager Features and Services
Guide.
Transmit UTF-8 for Calling Party
Name
This device uses the user locale setting of the device pool for the
device o determine whether to send unicode and whether to
translate received unicode information.
For the sending device, if you check this check box and the user
locale setting in the device pool for the device matches the
terminating phone user locale, the device sends unicode. If the
user locale settings do not match, the device sends ASCII.
The receiving device translates incoming unicode characters
based on the user locale setting of the sending device pool for the
device. If the user locale setting matches the terminating phone
user locale, the phone displays the characters.
Note The phone may display junk characters if the two ends of
the trunk configure user locales that do not belong to the
same language group.
Calling Party Transformation CSS This setting, which displays for FXS ports (not FXO ports), allows
you to localize the calling party number on the device. Make sure
that the Calling Party Transformation CSS that you choose
contains the calling party transformation pattern that you want to
assign to this device.
Tip Before the call occurs, the device must apply the
transformation by using digit analysis. If you configure
the Calling Party Transformation CSS as None, the
transformation does not match and does not get applied.
Ensure that you configure the Calling Party
Transformation Pattern in a non-null partition that is not
used for routing.
Table 90-6 FXS/FXO Port Configuration Settings (continued)
Field Description