Filter
Top Products
90-51
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 90 Gateway Configuration
Port Configuration Settings
Calling Party Selection Any outbound call on a gateway can send directory number
information. Choose which directory number is sent:
• Originator—Send the directory number of the calling device.
• First Redirect Number—Send the directory number of the
redirecting device.
• Last Redirect Number—Send the directory number of the last
device to redirect the call.
• First Redirect Number (External)—Send the directory number
of the first redirecting device with the external phone mask
applied.
• Last Redirect Number (External)—Send the directory number
of the last redirecting device with the external phone mask
applied.
Called party IE number type
unknown
Choose the format for the number type in called party directory
numbers.
Cisco Unified Communications Manager sets the called directory
number (DN) type. Cisco recommends that you do not change the
default value unless you have advanced experience with dialing
plans such as NANP or the European dialing plan. You may need to
change the default in Europe because Cisco Unified
Communications Manager does not recognize European national
dialing patterns. You can also change this setting when you are
connecting to a PBX that expects the called directory number to be
encoded to a non-national type numbering plan.
Choose one of the following options:
• Cisco Unified Communications Manager—Use when the Cisco
Unified Communications Manager sets the directory number
type.
• Unknown—Use when the dialing plan is unknown.
• National—Use when you are dialing within the dialing plan for
your country.
• International—Use when you are dialing outside the dialing
plan for your country.
• Subscriber—Use when you are dialing a subscriber by using a
shortened subscriber number.
Table 90-7 Digital Access PRI Port Configuration Settings (continued)
Field Description