Filter
Top Products
6-2
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 6 Date/Time Group Configuration
Date/Time Group Configuration Settings
Table 6-1 Date/Time Group Configuration Settings
Field Description
Group Name Enter the name that you want to assign to the new date/time group.
Time Zone From the drop-down list box, choose the time zone for the group that you are
adding.
The default setting for new Cisco Unified Communications Manager
installations equals (GMT) Monrovia, Casablanca.
If you upgrade from a compatible Cisco Unified Communications Manager
release and you use “local time zone of Communications Manager” in the
configuration, the Cisco Unified Communications Manager database
determines the appropriate time zone for the database server and then
displays that time zone as replacement for the Communications Manager
time zone.
Separator Choose the separator character to use between the date fields.
Date Format Choose the date format for the date that displays on the Cisco Unified IP
Phones.
Time Format Choose a 12-hour or 24-hour time format.
Selected Phone NTP
References (ordered by
highest priority)
To ensure that a phone that is running SIP gets its date and time
configuration from an NTP server, add the phone NTP reference(s) to the
date/time group. To add a phone NTP reference to the date/time group,
perform the following tasks:
1. Click the Add Phone NTP References button.
2. Find the phone NTP reference(s) that you want to add, as described in
the
“Finding the Phone NTP References” section on page 5-2.
Only phone NTP references that exist in the Cisco Unified
Communications Manager database display. For information on adding
a phone NTP reference to Cisco Unified Communications Manager
Administration, see the
“Configuring the Phone NTP References”
section on page 5-3.
3. After the search results display, check the check boxes for the phone
NTP references or click Select All.
4. Click Add Selected.
After you add the phone NTP reference(s) to the date/time group, you can
prioritize them, starting with the first reference that you want the phone to
contact. For example, to move a reference to the top of the list, highlight the
entry in the pane and click the Up arrow. To move a reference to the bottom
of the list, highlight the entry in the pane and click the Down arrow.
Tip To remove a phone NTP reference from the date/time group,
highlight the server in the pane and click Remove Phone NTP
References. Removing the phone NTP reference from the date/time
group does not remove the phone NTP reference from the Cisco
Unified Communications Manager database.