Filter
Top Products
CHAPTER
90-1
Cisco Unified Communications Manager Administration Guide
OL-18611-01
90
Gateway Configuration
Cisco Unified Communications gateways enable Cisco Unified Communications Manager to
communicate with non-IP telecommunications devices. Cisco Unified Communications Manager
supports several gateway types as described in the Cisco Unified Communications Manager System
Guide.
These sections provide information about using Cisco Unified Communications Manager for working
with and configuring Cisco gateways.
• Gateway Configuration Settings, page 90-2
–
MGCP Gateway Configuration Settings, page 90-2
–
H.323 Gateway Configuration Settings, page 90-4
–
Analog Access Gateway Configuration Settings, page 90-22
–
Cisco VG248 Gateway Configuration Settings, page 90-27
–
Cisco IOS SCCP Gateway Configuration Settings, page 90-28
• Port Configuration Settings, page 90-30
–
FXS/FXO Port Configuration Settings, page 90-31
–
Digital Access PRI Port Configuration Settings, page 90-39
–
Digital Access T1 Port Configuration Settings, page 90-62
–
BRI Port Configuration Settings, page 90-69
–
POTS Port Configuration Settings, page 90-82
–
Loop-Start Port Configuration Settings, page 90-84
–
Ground-Start Port Configuration Settings, page 90-85
–
E & M Port Configuration Settings, page 90-86
• Finding Specific Gateways, page 90-88
• Adding Gateways to Cisco Unified Communications Manager, page 90-89
• Modifying Gateways and Ports, page 90-101
• Understanding Cisco Unified Communications Manager Voice Gateways, Cisco Unified
Communications Manager System Guide