Filter
Top Products
64-18
Cisco Unified Communications Manager Administration Guide
OL-18611-01
Chapter 64 Directory Number Configuration
Directory Number Configuration Settings
Line [number] on Device [device name]
Note These fields display only after you associate this directory number with a device.
Display (Internal Caller ID) Leave this field blank to have the system display the extension.
Use a maximum of 30 alphanumeric characters. Typically, use the user name or the directory
number (if using the directory number, the person receiving the call may not see the proper
identity of the caller).
Setting applies only to the current device unless you check the check box at right (Update
Shared Device Settings) and click the Propagate Selected button. (The check box at right
displays only if other devices share this directory number.)
ASCII Display (Internal
Caller ID)
This field provides the same information as the Display (Internal Caller ID) field, but you
must limit input to ASCII characters. Devices that do not support Unicode (internationalized)
characters display the content of the ASCII Display (Internal Caller ID) field.
Setting applies only to the current device unless you check the check box at right (Update
Shared Device Settings) and click the Propagate Selected button. (The check box at right
displays only if other devices share this directory number.)
Line Text Label Use this field only if you do not want the directory number to show on the line appearance.
Enter text that identifies this directory number for a line/phone combination.
Suggested entries include boss name, department name, or other appropriate information to
identify multiple directory numbers to secretary/assistant who monitors multiple directory
numbers.
Setting applies only to the current device unless you check the check box at right (Update
Shared Device Settings) and click the Propagate Selected button. (The check box at right
displays only if other devices share this directory number.)
ASCII Line Text Label This field provides the same information as the Line Text Label field, but you must limit input
to ASCII characters. Devices that do not support Unicode (internationalized) characters
display the content of the ASCII Line Text Label field.
Setting applies only to the current device unless you check the check box at right (Update
Shared Device Settings) and click the Propagate Selected button. (The check box at right
displays only if other devices share this directory number.)
External Phone Number
Mask
Indicate phone number (or mask) that is used to send Caller ID information when a call is
placed from this line.
You can enter a maximum of 24 number, the international escape character +, and “X”
characters. The Xs represent the directory number and must appear at the end of the pattern.
For example, if you specify a mask of 972813XXXX, an external call from extension 1234
displays a caller ID number of 9728131234.
Setting applies only to the current device unless you check the check box at right (Update
Shared Device Settings) and click the Propagate Selected button. (The check box at right
displays only if other devices share this directory number.)
Table 64-1 Directory Number Configuration Settings (continued)
Field Description