Filter
Top Products
3. Tool Offset (M system)
3.2 Tool Registration
I
-121
Refer to "3 (I). Tool Offset (L system)" for L system.
3.2.2 Tool Registration in Magazine Pot
OFFSET REGIST LIFE MENU
T 0 M
MG( 1 )
TOOL(
1234
) D(
2
) AUX
( )
Set 1 in MG ( ),
1234 in TOOL ( ), and
2 in D ( ).
Press the
INPUT
key.
[T-REGISTRATION] TOOL 2.1/2
HEAD NEXT-1 NEXT-2 NEXT-3 SEARCH
MG TOOL-D MG TOOL-D MG TOOL-D
1 1234-2 11 21
2 12 22
3 13 23
4 14 24
The tool number and data in D are displayed in the specified
magazine number area. The magazine number in setting area MG
( ) is incremented by one and the data in other parenthesis pairs
disappears.
If a number other than magazine numbers listed in the data display
area is set, the screen is changed to the screen corresponding to
the setup magazine number when the
INPUT
key is first pressed.
When the
INPUT
key is pressed again, the data set in the area is
displayed.
(Note)
For the functions and purpose of data in D, refer to the
appropriate manual issued by the machine maker.