Filter
Top Products
2. Monitor
2.2 COORDINATE
I-40
(h) The number of characters that can be input at once will be the total of the number of characters
added (or deleted) with buffer correction and the number of characters in the other blocks
displayed in the correction area. The maximum number will be 234 characters (39 characters ×
6 lines). When adding data, characters exceeding the correction area's margin cannot be
added.
In this case, press the
INPUT
key and quit the buffer correction once. Then, correct the buffer
again. When buffer correction is started, a line return is added for each block and a space is
added for each word, so there will be more space for adding characters.
(Example) Add "N175 G74 Z–10.0 R–5.0 P2.0 ;" after N170.
N120 G02 X150.0 Y100.0 I25.0 J0.0;
N130 G02 X150.0 Y150.0 I0.0 J25.0;
N140 G02 X200.0 Y150.0 I25.0 J0.0;
N150 G02 X200.0 Y200.0 I0.0 J25.0;
N160 G02 X250.0 Y200.0 I25.0 J0.0;
N170 G02 X250.0 Y250.0 I0.0 J25.0;
N180 G02 X300.0 Y250.0 I25.0 J0.0;
Press the
key.
N130 G02 X150.0 Y150.0 I0.0 J25.0;
N140 G02 X200.0 Y150.0 I25.0 J0.0;
N150 G02 X200.0 Y200.0 I0.0 J25.0;
N160 G02 X250.0 Y200.0 I25.0 J0.0;
N170 G02 X250.0 Y250.0 I0.0 J25.0;
N180 G02 X300.0 Y250.0 I25.0 J0.0;
BUFFER EDIT
Insert "N175G74Z–10.0R;".
N130 G02 X150.0 Y150.0 I0.0 J25.0;
N140 G02 X200.0 Y150.0 I25.0 J0.0;
N150 G02 X200.0 Y200.0 I0.0 J25.0;
N160 G02 X250.0 Y200.0 I25.0 J0.0;
N170 G02 X250.0 Y250.0 I0.0 J25.0;N175G
74Z-10.0R;N180G02X300.0Y250.0I25.0J0.0;
BUFFER EDIT
Press the
INPUT
key.
N120 G02 X150.0 Y100.0 I25.0 J0.0;
N130 G02 X150.0 Y150.0 I0.0 J25.0;
N140 G02 X200.0 Y150.0 I25.0 J0.0;
N150 G02 X200.0 Y200.0 I0.0 J25.0;
N160 G02 X250.0 Y200.0 I25.0 J0.0;
N170 G02 X250.0 Y250.0 I0.0 J25.0;
N175 G74 Z-10.0 R;
N180 G02
X
300.0 Y250.0 I25.0 J0.0;