Filter
Top Products
9. Graphics
9.6 SCALE
I-362
(Note 1)
The scale value is incremented/decremented by approx. 5% each time the
or
key is
pressed.
(Note 2) The scale value can be changed in the range of 0.100 to 9999.999.
9.6.2 Changing the Display Position
To move the drawing position, either designate the center of the display range using the cursor key, or use
the current tool position as the center of the display range using the
C.B
CAN
key.
(1) Designating the display range center
X SCALE0 300.000
Y
Press the menu key
SCALE
.
1) The cursor indicating the display range
center appears.
X SCALE0 300.000
Move the cursor to the required
display center position using the
cursor keys
,
,
,
.
Y
X
Press the
INPUT
key.
1) The coordinate system changes to the
new coordinate system (having the
cursor position as the screen center).
2) All already drawn graphics (if present)
are erased, and the screen returns to
the initial screen.
Y
(Note 1) The amount the center moves for one cursor shift varies depending on the current scale value.