Filter
Top Products
6. Data In/Out
6.2 DATA OUTPUT
I-245
6.2.4 Outputting Common Variable Data
Common variable data can be output. The output operation can be performed even during automatic
operation.
(1) Common variable data output operation
1) Data output starts and the contents of the
output data and message "DATA OUT
EXECUTION" are displayed.
2) When tape end code % (EOR) is output, the
data output completes with message "DATA
OUT COMPLETE" displayed.
# ( 5 ) DATA ( )
<OUTPUT DATA>
%
DATA OUT COMPLETE
# ( ) DATA ( )
Press the
INPUT
key.
Set the data type to the common
variable.
# ( 5
) DATA ( )
<OUTPUT DATA>
DATA OUT EXECUTION
# ( 5 ) DATA ( )
(Note) For the multiple system, data will be output following the parameters below.
#1303 V1comN (#100 to set number) system common variables
#1304 V0comN (#500 to set number) system common variables
The number of data items designated in the parameter will be output in the same manner as the
single system. The other common variables will be output for each system.