Filter
Top Products
8. High-speed Program Server
8.4 IC card
I-340
8.4 IC Card
When the menu key
IC CARD
is pressed, the IC CARD screen is displayed.
A list of the machining programs in the IC card will appear on the IC Card Input/Output screen.
The machining programs can be input, output, deleted, searched and listed on this screen.
[IC CARD] PROGRAM SERVER 3./
#1 IN(IC
→
NC) PROGRAM ENTRY
#2 OUT(NC
→
IC) BYTE
#3 PROGRAM ERASE <PROGRAM><BYTE><COMMENT>
#4 PROGRAM SEARCH
#( )O( )
COPY HOSTSET HOST IC CARD MENU
Function Details
#1 IN (IC → NC)
Selects the machining program input operation (IC card
→ NC memory).
#2 OUT (NC → IC)
Selects the machining program output operation (NC
memory
→ IC card).
#3 PROGRAM ERASE Erases the machining program in the IC card.
#4 PROGRAM SEARCH Searches for machining programs saved in the IC card.
Item Details
PROGRAM
ENTRY
The number of machining programs saved in the IC card is displayed.
BYTE The remaining number of bytes that can be saved in the IC card is displayed.
<PROGRAM> The machining program No. (1 to 99,999,999) saved in the IC card is displayed.
<BYTE> The number of machining program bytes saved in the IC card is displayed.
<COMMENT> A machining program comment (up to 18 characters) is displayed.
(Note 1) The list is displayed in the order that the IC cards are saved. If the files in the IC card are erased
and files are output to the IC card repeatedly, the files will be written into the area opened by
erasing the files. Thus, the files may not be displayed in the actually saved order.
(Note 2) When using the 2-part system, the screen operations can be disabled with the parameters.
#1050
MemPrg
#1286
ext22/bit0
Details
0, 2, 4, 6 - When using the M system, all operations are possible. When using the L
system, operations other than operation search are possible. An error
(E60) will occur if operation search is attempted.
1, 3, 5, 7 OFF Input/output of the machining programs registered in the System 1
memory is possible.
ON An error (E05) will occur if input/output is attempted.