Filter
Top Products
5. Program
5.3 Program Edit Operation
I-183
5.3.4 Data Insertion (
SHIFT
DELETE
INS
)
For example, let's try to insert data F5000 in the block N7 G03 Y200. J100.;.
Move the cursor to the character
following the position in which the
data is to be inserted.
N7 G03 Y200. J100. ;
M02;
%
(1)
Press the
SHIFT
key, then
DELETE
INS
key.
N7 G03 Y200. J100. ;
M02;
%
(2)
1) The characters to the right of the cursor are
moved to the right (; in this case).
2) Data can be inserted in the position indicated by
the cursor.
Insert the data.
F5000
N7 G03 Y200.J100.F5000 ;
M02;
% EDITING
(3)
1) When the key for the character to be inserted is
pressed, the character is set in the position
indicated by the cursor.
2) Each time one character is inserted, the cursor
is automatically moved one column to the right
and the characters to the right of the cursor (; in
this case) are also moved to the right.
3) Any number of characters can be consecutively
inserted by repeating 1) and 2) above. However,
when there is no space to the right of the cursor
on the screen, no more data can be inserted.
4) When data is entered by using the keys, the
message "EDITING" is displayed.
A
fter completion of correction, press
the
INPUT
key.
N7 G03 Y200.J100.F5000 ;
M02;
%
(4)
1) The new data is written into memory.
2) The new data is also displayed with each word
being both preceded and followed by space.
3) When the data has been written into memory,
the "EDITING" message disappears.