Filter
Top Products
5. Program
5.6 PLAYBACK
I-195
5.6 PLAYBACK
The playback function enables creation of a program while trying sample machining by manual (handle or
jog) feed or mechanical handle feed.
A machining program can be created with move distance data obtained by manual operation used as
programmed command values.
SEARCH MAKE LARGE FILE
O 100 PLAYBACK
N1 G28 XYZ;
N2 G00 X10.Y10.;
EDIT
[MACHINE] [PLAYBACK : ABS]
X -10.100 X -10.000
Y -10.101 Y -10.000
Z 0.000 Z 0.000
[MEMORY]
[ADD]
Playback Edit
x1
Manual
feed
y1
Move
distance
Start
Check the parameter:
Use parameter #1126 PB-G90 to
determine absolute/incremental values.
Search the edit screen for the number o
f
the machining program to be created in
playback mode.
Turn the playback switch ON.
Error?
Y
N
Move the machine in manual mode.
Create data such as G codes, X and Y axis
commands, and F commands.
Error?
Y
N
Does playback
edit continue?
Y
N
Turn the playback switch OFF.
End
%
O 12345678
N1G28X0Y0Z0 ;
N2G00X-10. Y-10.;
N3G01X-10. Y-20.
F1000 ;
Machining program
Machining program
%
O 12345678
N1G28XYZ;
N2G00X-10. Y-10.;
N3G01X20.
Y-10.F1000;
Machining program creation flowchart in playback mode