7. Diagnosis
7.9 Auxiliary Axis Parameter
I
-303
(3) Supplementary Items
The following shows the process when the No. of axes set in the set up parameters differs from the No. of
MR-J2-CT axes connected.
No. of axes set No. of axes connected, or the
No. of axes set = 0.
MR-J2-CT parameter input MR-J2-CT parameter input not carried out.
MR-J2-CT parameter output MR-J2-CT parameter output not carried out.
The following shows the process when there are more input data axis Nos. than there are axes set in the
setup parameters.
Input data axis No. > No. of axes set
MR-J2-CT parameter input Input data exceeding the No. of set axes is not input.