Filter
Top Products
8. High-speed Program Server
8.2 Host (Compatible with M60 Series)
I-325
8.2.3 Uploading (Host to IC)
An example of saving the machining program "3000.prg" registered in the IC card as "TESTCUT2" in the host
computer is explained in this section.
COPY HOSTSET HOST
#(3) ( )
→
( )
(1) Input "3" in the setting area # ( ), and press
the cursor key
.
COPY HOSTSET HOST
#(3) ( )
→
( )
(2) Input the number of the program to be
transmitted from the IC card to the host
computer in the setting area ( ), and
press the cursor key
.
* Input only the program No. (The extension
".PRG" does not need to be input.)
COPY HOSTSET HOST
#(3) ( )
→
( )
(3) Input the name of the file to be saved in the
host computer in the following setting area .
Up to 12 uppercase alphabetic characters
can be designated as the file name.
If the input is omitted, the program file name
will be the same as that designated in step
(2).
No. < NAME > < BYTE > < DATE > <TIME>
1 12345678.PRG 12345678 1999 /04/29
2 1000.prg 123 /05/03 09:32
3 Testcut2 123 /05/04 09:32
(4) Press the
INPUT
key.
HOST IC CARD MENU
DIR. ( )
DATA OUT EXECUTION
The message "DATA OUT EXECUTION" will
appear. When the transmission is completed, the
message "DATA OUT COMPLETE" will appear,
and the setting area will be cleared. The displayed
file list will be updated.
(Note 1) The transmission cannot be canceled.
(Note 2) Operations on the screen cannot be carried out during the transmission.