Filter
Top Products
2. Monitor
2.2 COORDINATE
I-35
(b)
Press the
key.
1) The head area of the program
being executed will change to the
buffer correction area when the
cursor key is pressed.
(The buffer correction mode will be
entered.)
2) The message "BUFFER EDIT" will
appear.
N125 G01 X80. Y195.;
N126 Y150.;
N127 G02 X100. Y185. R20.;
N128 G01 X110.;
N129 G01 X120.;
N130 G01 X130.;
BUFFER EDIT
P62 F-CMD. NOTHING
(c)
Insert "F50" at the end of the
N125 line.
BUFFER EDIT
P62 F-CMD. NOTHING
N125 G01 X80. Y195. F50.;
N126 Y150.;
N127 G02 X100. Y185. R20.;
N128 G01 X110.;
N129 G01 X120.;
N130 G01 X130.;
(d)
Press the
INPUT
key.
1) The buffer correction will end when
the INPUT key is pressed, and the
program being executed will
display.
(The buffer correction mode will be
canceled.)
2) The message "BUFFER EDIT" will
disappear.
3) The program error (P62) will
disappear.
N124 G00 X68. Y201.;
N125 G01 X80. Y195. F50.;
N126 Y150.;
N127 G02 X100. Y185. R20.;
N128 G01 X110.;
N129 G01 X120.;
(e)
Start automatic operation.
Execution will resume from the N125 block.