Filter
Top Products
2. Monitor
2.1 POSITION
I-22
Display item Explanation
The relative of the relation value counter display contents and the
parameters is as shown below.
<M60 series>
<M60S series>
#1287 ext23
/bit3
#1221
aux 05/bit7
0 1
0
Relative
value (figure
below (a))
Relative value (figure below (b))
The compensation amount is
considered according to #1287
ext23/bit4,5 contents.
1
Relative
value (figure
below (a))
The current value B is displayed
in M60S series.
In the M60A/64 lathe system, not
only the counter of the
POSITION screen but also the
relative value of the
COORDINATE screen changes
to the current value B.
The relative value (figure below
(b)) is displayed in the
M64A/64(Machining system)
/65/66.
0
Relative value
The compensation amount is considered
according to #1287 ext23/bit4,5 contents.
#1221 aux
05/bit7
1
Current value B
The counter of the POSITION screen changes
to the current value B.
S 12345 (2000)
T 1234
M 12
Fc 12000.00
The spindle rotation speed command value is displayed. The actual
spindle rotation speed is shown in ( ).
The tool command value is displayed.
The last four digits of the miscellaneous function command value
are displayed.
During interpolation feed, the speed in the current vector direction in
moving is displayed.
During independent axis feed, the speed of the axis with the highest
speed is displayed.
G00 X-345.67 Y345.67;
T1234;
N100 S5000M3;
N200 G00Z-100.;
Four blocks of the current program being executed are displayed.
The top block is an already executed block.
The subsequent three lines are the subsequent block program.