Filter
Top Products
6. Daily Maintenance and Periodic Inspection and Maintenance
6.3 Replacement Methods
III-41
(b) For a flat cable type connector with latches, open the latches in the directions of the arrows, and pull the
connector off.
(1) Open
(2) Pull
(c) For a flat cable type connector without latches, hold the connector with a thumb and forefinger, and pull
the connector off.
(1) Hold with thumb and forefinger.
(2) Pull
(d) For the screw fixed type connector, loosen the two fixing screws, and pull the connector off.
(1) Loosen
(1) Loosen
(2) Pull
(2) Pull
Do not connect or disconnect the connection cables between each unit while the
power is ON.
Do not connect the cable by pulling on the cable wire.
CAUTION