Filter
Top Products
8. Maintenance Functions
8.2 Data Sampling
III-79
(17) Example of conditions for ending with address
[Setting details]
#22 E-CONDITION ... "3"
#25 ADDRESS ... "12345678"
#26 DATA ... "00000100"
#27 DATA MASK ... "0000FFFF"
[Meaning of setting details]
The point where results of applying a mask with 0000FFFF onto the data in address 12345678 are
00000100 will function as the sampling end trigger.
8.2.4 Data Output Procedures
The sampled data can be output by setting "S" in "# ( )" on the DATA OUT screen.
[DATA OUT] IN/OUT 2
<LOCK>
# 1 MAIN PROGRAM
# 2 TOOL DATA OFF #11 PORT NO. 2
# 3 PARAMETER OFF #12 DEVICE NO. 1
# 5 COMMON VARI. OFF (FDD:9600bps)
#30 MACRO PROGRAM #28 AUX-PARA.
#60 TRACE DATA
#99 MAINTENANCE
<OUTPUT DATA>
#( S) DATA( ) ( )
INPUT OUTPUT ERASE FILE MENU
(Note 1) The data will not be output if sampling has not been executed.
(Note 2) The data will not be output if the sampling output valid parameter is not set to valid.
(Sampling output is validated by setting setup parameter "#1224 aux08/bit0" to 1.)
The output data is the sampling buffer dumped with a long data length (4 bytes).
The header, etc., are not added, and the sampling data is output immediately.
(Example) When number of sampling points is "2" ("2" MARKS" = 2)
00044363
000222A8
00044363
000222A8
00044363
:
... 1st point 1st scan data
... 2nd point 1st scan data
... 1st point 2nd scan data
... 2nd point 2nd scan data
... 1st point 3rd scan data
: