Filter
Top Products
8. High-speed Program Server
8.1 Host Setting
I-318
8.1 Host Setting
When the menu key
HOSTSET
is pressed, the HostSet screen is displayed.
COPY HOSTSET HOST IC CARD MENU
[HostSet] PROGRAM SERVER 1. 1/2
#1 User name (MELDAS65 )
#2 Pass word (
∗∗∗∗∗∗∗∗
)
#3 DIR. (/MACHINE/PRG )
#4 Host address (127.126.125.124)
#5 Comment (HOSTNAME )
#6 User name ( )
#7 Pass word ( )
#8 DIR. ( )
#9 Host address ( )
#10 Comment ( )
#( ) ( )
Host computer A
Host computer B
Up to four host computers (host computers A to D) can be set on the HostSet screen. Set host computers A
and B on the first page, and host computers C and D on the second page.
(Note) Depending on the model, only one screen equivalent to host computer A will appear.
Details
Item
No. of input
characters
#1 User name Set the user name for logging into the host computer. 15
#2 Password
Set the user password for logging into the host
computer.
15
#3 DIR. Designate the host directory to access. 63
#4 Host address Set the IP address of the host computer. 15
#5 Comment Set the comment of the host computer. 10
#6 to #10 Same as #1 to #5.
The following explanations indicate the case for setting the upper level (host computer A on page 1).
(Note) Designate the path under the open directory set in the host computer's FTP server for the directory
designated in #3 and #8.
(The open directory is the directory that can be referred to by the client (NC).
The open directory is handled as the root directory (/) by the client.)
(Example) When open directory is "c:\PRG"
... The NC handles the above directory as the root directory (/).