Filter
Top Products
8. High-speed Program Server
8.4 IC card
I-343
8.4.3 Erasing a Machining Program in the IC Card
The following operations are used to erase a machining program.
(1) Set #3 and the program No. (1 to 99,999,999) to be erased.
(Example) To erase program 1000.
# (3) 0 (1000)
# ( 3 ) 0 ( 1000)
(2) Press the
INPUT
key.
The program erasing will start, and "
ERASE EXECUTION
" will appear in the message area.
ERASE EXECUTION
# ( 3 ) 0 ( 1000)
(3) When the erasing is completed, "
ERASE COMPLETE
" will appear in the message area, and the program
No. setting area will become blank.
ERASE COMPLETE
# ( ) 0 (
)
(Note 1) Programs being searched with "#4 PROGRAM SEARCH" cannot be erased.
(Note 2) Programs being called by the M198 command cannot be erased.