Filter
Top Products
1. Setting and Display Unit Operation
1.6 Screen Saver / Backlight OFF
I-18
(3) Setting the parameters
# Item Contents Setup range (unit)
8078 Screen Saver Set the time to turn the screen OFF.
The screen saver will not turn ON if 0 is set.
0 to 60 (min)
0: Do not turn screen
OFF.
(4) Target display units
This screen saver function is valid with the following display units.
(a) 9-type CRT/9.5-type EL
(b) 7.2-type/10.4-type monochrome LCD
(c) 10.4-type color LCD
(Note1) The display unit in (a) is valid only when the screen is turned OFF by the
SHIFT
and
C.B
CAN
keys on
the POSITION screen.
(Note2) The display units in (b) and (c) have a backlight which is turned ON/OFF.
(5) Precautions
(a) If the screen is turned OFF while keys can be operated on the EDIT screen, etc., and an
alphanumeric, symbol or INPUT key is pressed, the first key will be handled as that for turning the
screen ON. The key will not be input.
(b) If the function key, menu key, page key or system changeover key is pressed while the screen is
OFF, the screen corresponding to the pressed key will turn ON.
(c) The screen will not turn ON even if the reset key is pressed. However, if the screen display request
signal is input when the reset key is pressed, the screen will turn ON. Refer to the instruction
manual issued by each machine maker for details. Note that whether the screen will turn ON when
any of the machine operation board keys (other than the NC operation board keys) is pressed will
differ according to the machine specifications. Refer to the instruction manual issued by each
machine maker for details.
(d) Correspondence of
SHIFT
key.
The screen will not turn ON when just the
SHIFT
key is pressed.