Filter
Top Products
6. Data In/Out
I-223
6. Data In/Out
When the function selection key
DIAGN
IN/OUT
is pressed, the following menu is displayed:
Diagnosis menu (No.5 to 8)
Diagnosis menu (No.1 to 4)
Diagnosis menu (No.9 to 10)
Input/output menu (No.5), Program sever menu (No.1 to 3)
Input/output menu (No.1 to 4)
ABS-SRV ADJUST HISTORY CONFIG MENU
ALARM SERVO SPINDLE PLC-I/F MENU
AUX-PRM AUX-MON MENU
COPY HOSTSET HOST IC CARD MENU
INPUT OUTPUT ERASE FILE MENU
Menu selection keys Previous page key Next page key
Input/output menu
No.1 to 4
PREVIOUS
PAGE
NEXT
PAGE
DATA
INPUT
1:IN 2:COMP
DATA
OUTPUT
PROGRAM
ERASE
(Note)
Use
I/O PARA
of
TOOL
PARAM
to define the data input/output parameter.
Input/output menu
No.5
PROGRAM
COPY
COPY
CONDENSE
Diagnosis menu Refer to the section on diagnosis.
Program server menu Refer to the section on program server.
MENU
MENU
MENU
PROGRAM
FILE
PROGRAM
FILE
(Note) When connected to MELSEC GPPQ/GPPW or GOT, the RS-232C communication port is used
constantly, so the input/output device cannot be used.
Thus, if input/output operations are attempted when the parameters are set to MELSEC GPPQ/
GPPW or GOT connection, the "E60 IOP ERR-2" error will occur.