Filter
Top Products
5. Program
5.6 PLAYBACK
I-199
4) Convert the playback move distance into
machining program data.
Enter the necessary data, such as
sequence number and G code.
(Example)
N
1
0
G
0
0
[PLAYBACK : ABS]
X 0.125
Y 1.034
Z 0.010
[MEMORY]
[ADD] N10G00
Press axis address keys such as X
and Y.
(Example)
X
Y
[PLAYBACK : ABS]
X 0.125
Y 1.034
Z 0.010
[MEMORY]
[ADD] N10G00X0.125Y1.034
1) When an axis address key is pressed, the
playback move distance is displayed after the
corresponding axis address.
2) If an axis address key is pressed while the
playback counter is operating, playback data
at that time is displayed.
Press the
INPUT
key.
[PLAYBACK : ABS]
X 0.125
Y 1.034
Z 0.010
[MEMORY] N10G00X0.125Y1.034;
[ADD]
5) End playback editing.
Turn the playback switch OFF to end playback editing; the screen returns to the normal editing screen.
(3) Notes on playback operation
1) The number of characters specified in the [ADD] field must not exceed 96.
2) If an EOB (;) is omitted at the end of the program created in the [ADD] field, it is automatically
appended when the
INPUT
key is pressed.
3) Blocks can be delimited by inserting an EOB (;) between X and Y.
4) If an incorrect data is entered, the error message is displayed when the
INPUT
key is pressed. (See
the operation messages.)
5) Do not edit macro statements in playback mode; otherwise, for example, if an attempt is made to
input "XOR", input of the X may play back the X.
6) If one of the following items is operated during playback editing, another program may be called or
the state where no program has been called may occur:
SEARCH ERASE CONDENSE PROGRAM NO. CHANGE