Filter
Top Products
6. Data In/Out
6.1 DATA INPUT
I-233
6.1.7 Inputting Waveform Data
Waveform data that has been output by waveform data output operation can be input.
(1) Inputting waveform data
Set the data type to waveform data.
# ( 2
2 ) DATA ( )
# ( 22 ) DATA ( )
1) Read of the data is started.
The contents of input data and message
"DATA IN EXECUTION" are displayed.
2) When all data through the end has been input
and the tape end code % (EOR) is read, data
input ends with message "DATA IN
COMPLETE" displayed.
Press the
INPUT
key.
<INPUT DATA>
<COMP. DATA>
DATA IN EXECUTION
# ( 22 ) DATA ( )
<INPUT DATA>
%
<COMP. DATA>
DATA IN COMPLETE
# ( ) DATA ( )
(Note 1) If input operations are attempted while the waveform is displayed, the operation message
"V-ANALYZER EXEC." will appear, and the waveform display data will not be input.
(Note 2) If input operations are attempted while the Visual analyzing function is invalid, the error "E01
SETTING ERROR" will occur.