Filter
Top Products
2. Monitor
2.2 COORDINATE
I-29
Display item Explanation
[POSITION]
X -345.678
Y 345.678
Z 0.000#1
C 0.000
The current position during execution and the status abbreviation of
the axis are displayed.
The status symbol is the same as the display on the POSITION
screen.
(Note) When using the M64A/M64 lathe system, the relative value
display can be changed to the current value B (value that does not
include tool length offset amount, tool diameter compensation
amount, workpiece coordinate offset amount) by setting parameter
"#1221 aux05/bit7" and "#1287 ext23/bit3".
Workpiece offset
Machine
zero point
Workpiece
zero point
Relative value (a)
(Machine position)
Displayed by tool reference
position
Workpiece
coordinate
Current value B
Tool reference position
Tool nose position
Relative value (b)
Displayed by tool
nose position
Tool