Filter
Top Products
9. Graphics
9.4 Use of the Check Modes
I-351
9.4 Use of the Check Modes
To select a check mode, press menu key
CHECK
or
STEP
.
The check mode appears immediately when the check mode is selected.
(1) Preparation for checking
Press the menu key
SEARCH
to call the program.
O ( 1 0 0 0 )
N ( )
−
( )
Tape (0)
O ( ) N ( ) - ( ) TAPE (0)
Press the menu key
SEARCH
.
The data setting area appears.
(Example)
To check O1000, proceed as follows:
Press
INPUT
key.
O 1000 N -
SEARCH COMPLETE
The setting area disappears.
A
message appears to notify that the
search is com
p
leted.
O ( 1000) N ( ) - ( ) TAPE (0)
(Note 1) This operation search is exactly the same as that of the MONITOR function. Pressing the
automatic start button after the search is completed starts the automatic operation.
The operation mode is designated by the operation mode selection switch on the machine
operation panel.