Filter
Top Products
8. High-speed Program Server
8.3 Host (Compatible with M60S Series)
I-335
(6) Transferring files
1) Set the transfer origin and transfer
destination files.
(Refer to steps (1) to (3) in the previous
section for the operation methods.)
If the transfer destination file is omitted,
the file will be transferred with the same
name as the transfer origin file. Note that
when inputting and outputting the
machining programs in the memory
device, the extension (.PRG) will be
added or deleted automatically.
[HOST]
DEVICE A
#1 DEVICE (HOST A )
#2 DIR. (/MACHINE1/PRG
#3 FILE (100.PRG
DEVICE B
#4 DEVICE (MEMORY )
#5 DIR. (/PRG/USER
#6 FILE (100
Automatically determining the transfer origin file name
Transfer origin
device: /file name
Transfer
destination
device:
/file name
Transfer
destination file
name
Explanation
Memory:
/PRG/USER/100
Host A:
/
100.PRG Transferred as same file name +
extension is automatically added
Memory:
/PRG/USER/100
IC card:
/
100.PRG Transfer to the IC card is the same
as the host
Memory:
/PRG/USER/100
Host A:
/200
200.PRG Extension is automatically added
Memory:
/PRG/USER/100
Host A:
/200.TXT
200.TXT Transferred with designated file
name
Host A:
/100.PRG
Memory:
/PRG/USER
100 Extension (PRG) is automatically
deleted
Memory:
/PRG/DAT/TOOL.OFS
Host A:
/
TOOL.OFS Transferred as same file name
Memory:
/PRG/DAT/TOOL.OFS
Host A:
/OFFSET
OFFSET Extension is not added automatically
Host A:
/100.PRG
IC card:
/
100 Extension is not added automatically
between host and IC card
A CHOICE B CHOICE CHANGE
#(7) (
2) Input "7" in the setting area # ( ), and
press the
INPUT
key.
When using #7 Transmit [A
→
B], device A
will be the transfer origin.
When using #8 Transmit [B→A], device B
will be the transfer origin.
WRITE :NO SCR.CHG
The transfer will start, and the message
"WRITE :NO SCR.CHG " will appear.
When the transfer is completed, the message
"WRITE COMPLETE" will appear, and then
"DATA IN COMPLETE" or "DATA OUT
COMPLETE" will appear.
(Note 1) When transferring multiple files with the "∗" designation, the message "WRITE :NO SCR.CHG" and
"WRITE COMPLETE" will appear each time a file is transferred. "DATA IN COMPLETE" or "DATA
OUT COMPLETE" will appear when the last file has been transferred.