Filter
Top Products
3-49
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 3 Adding and Troubleshooting Devices Using Device Management
Device List Manipulation Service
Adding Devices to Device Credentials Using DLMS
Using the DLMS function you can add devices to Device and Credentials Repository. After adding
devices to Device and Credentials Repository you can add these devices to RME manually or
automatically (see
Adding Devices to RME).
The new device information should be added using the deviceInfo tag.
The CSV version used for adding devices to Device and Credentials is 2.0. You must enter device name
(including domain name or simply an IP address) and the SNMP read community string.
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
The sample XML File for Adding Devices to Device and Credentials Repository (dlmsAddDevices.xml):
<source>
<host>CiscoWorks-Server</host>
<product>CiscoWorks:RME</product>
<version>2.0</version>
<description>Using DLMS for adding devices into Device and Credential
Repository</description>
</source>
<addDevices>
<deviceInfo>
<![CDATA[
;
; This file is generated by the export utility
; If you edit this file, be sure you know what you are doing
;
Cisco Systems NM data import, source = export utility; Version = 2.0; Type = Csv
;
; Here are the columns of the table.
; Columns 1 and 2 are required.
; Columns 3 through 20 are optional.
; Col# = 1: Name (including domain or simply an IP)
; Col# = 2: RO community string
; Col# = 3: RW community string
; Col# = 4: Serial Number
; Col# = 5: User Field 1
; Col# = 6: User Field 2
; Col# = 7: User Field 3
; Col# = 8: User Field 4