Filter
Top Products
3-17
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 3 Adding and Troubleshooting Devices Using Device Management
Using the RME Devices Window
Changing the SNMP timeout value affects inventory collection.
• TelnetTimeout—Duration of time the system should wait for a device to respond before it tries to
access it again. The default value is 36 seconds. The minimum value is zero seconds. There is no
maximum value limit.
• Natted RME IP Address—RME server ID. This is the translated address of RME server as seen from
the network where the device resides. This is used when RME tries to contact devices outside the
NAT boundary. The default value is
Default Not Defined.
Exporting RME Device Credentials
You can export the device credentials for the RME devices in CSV or XML format.
You can also export RME device credentials using the command line tool,
cwcli inventory crmexport. See Overview: cwcli inventory Command.
You can import the edited device credentials using Common Services > Device and Credentials >
Device Management > Bulk Import.
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
To export RME devices credentials:
Step 1 Select Resource Manager Essentials > Devices > Device Management > RME Devices.
The RME devices dialog box appears.
Step 2 Select the RME devices. See Using RME Device Selector for further information.
Step 3 Click Export.
A message appears, Export will store password in clear text. Do you still want to continue?
Step 4 Click OK to continue or Cancel to abort the export.
If you click OK, then the Export To File dialog box appears.
a. Enter the folder name and the filename on the RME server.
Or
–
Browse to select a folder on the RME server.
The Server Side File Browser dialog box appears.
–
Select a folder and file on the RME server.
–
Click OK.
b. Select the file format, CSV or XML.
The supported version for CSV is 3.0.
Warning
The device passwords will be displayed in plain text.
Step 5 Click OK.
The RME devices dialog box appears.