Filter
Top Products
19-110
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 19 CLI Utilities
Software Management CLI Utility
Enter the RSAC Address:
Old Syslog Collector Port :0
Enter new Syslog Collector port:
Ensure that the RSAC port that you configure in the RME server corresponds with the Collector port
configured in the RSAC server.
You can specify srme-w2k as the RSAC Address, and change the Syslog Collector port from 0 to
3456.
After providing the RSAC Address and port information, the following message is displayed.
INFO: Remote Syslog Collector(RSAC) port has been changed from 0 to 3456.
• If you enter 4, the following message is displayed with the old Syslog Directory Path. You are also
prompted to enter the new Syslog Directory path.
INFO: You have opted to change Syslog File Location
Old Syslog Directory : /var/log/
Enter Full Path of New Syslog Directory:
Ensure that you enter the full directory path, if you are running the syslogConf.pl script on Solaris.
You can provide the relative directory path if you are running the syslogConf.pl script on Windows.
For example you can change the Syslog Directory location from /var/log/ to /var/log/newSyslogLoc.
After providing the required information, the following message is displayed.
Syslog file location changed from: /var/log/ to: /var/log/newSyslogLoc
• If you enter Q, you are allowed to quit from the script.
Software Management CLI Utility
You can invoke Software Management (SWIM) features from Command Line Interface (CLI).
The cwcli swim commands let you use SWIM features from the command line. You can use the cwcli
swim
commands to:
• List Images from Software Management (SWIM) Repository
• Export Images from Software Management (SWIM) Repository
These functions are only accessible to the Network Administrator, Network Operator and super users
who have all of the roles.
If you do not have permission to run custom commands, you can run a command or command set from
the CLI only if:
• The command set is assigned to you by the Administrator.
• The command set has at least one command that can be run on the specified device.
Running cwcli swim Command
The command syntax for running cwcli swim commands is: