Filter
Top Products
8-11
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Configuring Transport Protocols
SSH Know the username and password for the device. If device is configured for TACACS authentication, enter the
Primary Username and Primary Password.
Know password for Enable modes.
When you select the SSH protocol for the RME applications (Configuration Archive, NetConfig,
ConfigEditor, and NetShow) the underlying transport mechanism checks whether the device is running
SSHv2.
If so, it tries to connect to the device using SSHv2.
If the device does not run SSHv2 and runs only SSHv1 then it connects to the device through SSHv1.
If the device runs both SSHv2 and SSHv1, then it connects to the device using SSHv2.
If a problem occurs while connecting to the device using SSHv2, then it does not fall back to SSHv1 for the
device that is being accessed.
Some useful URLs on configuring SSHv2 are:
• Configuring Secure Shell on Routers and Switches Running Cisco IOS:
http://www.cisco.com/warp/public/707/ssh.shtml
• How to Configure SSH on Catalyst Switches Running Catalyst OS:
http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a0080094314.shtml
• Configuring the Secure Shell Daemon Protocol on CSS:
http://www.cisco.com/en/US/partner/products/hw/contnetw/ps792/
products_configuration_guide_chapter09186a00801eea45.html#1105358
• Configuration Examples and TechNotes:
–
http://www.cisco.com/en/US/tech/tk583/tk617/tech_configuration_examples
_list.html
–
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802045d
c.html
To use this
Protocols You must...