Filter
Top Products
20-4
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 20 Enabling Approval and Approving Jobs Using Job Approval
Assigning Approver Lists
To edit an Approver List:
a. Select the list.
The approvers of the list appear in the List Members list box.
b. Add new approvers, or remove existing ones in using the Add and Remove buttons in the Users
group of fields.
To delete an Approver List:
a. Select the list.
b. Click Delete.
A message appears:
Are you sure you wish to delete? Approval will be disabled for applications to which
the Listname is assigned!
c. Click OK to delete the list.
Assigning Approver Lists
You can assign an Approver list to each of the RME applications, from the available Approver lists.
Note View Permission Report (Common Services > Server > Reports) to check if you have the required
privileges to perform this task.
To assign an Approver list:
Step 1 Select Resource Manager Essentials > Admin > Approval > Assign Approver Lists.
The Assign Approver Lists dialog box appears.
Step 2 Select the required Approver list from the drop-down list box for that application. Repeat this for each
of the applications listed here.
Step 3 Click Assign.
The selected Approver lists are assigned to the applications.
Setting Up Job Approval
The Approval Policies dialog box allows you to set up Job Approval for all applications for which you
can set up job approval. The applications are:
• NetConfig
• NetShow
• Config Editor
• Archive Management. See Using Job Approval for Archive Management for details.