Filter
Top Products
11-6
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
NetShow Job Browser
You can click the page icon in the left pane to get the corresponding results in the right pane.
Step 3 Click the device name link in the Device Details table.
The NetShow Device Details pop-up page appears with the device name and commands in the left pane
and the commands output in the right pane.
By default, the command output is a consolidated one for all the listed commands.
To convert the output into a printer-friendly format click the Printer button.
A printer-friendly format of the consolidated output for all commands appears.
Step 4 Select a command from the Device list tree in the left pane and click
Analyze Output to analyze the output of the command.
You can mask the credentials shown in the output of show commands. See Masking Credentials for more
details on masking credentials and Viewing and Analyzing NetShow Output for more details on viewing
and analyzing NetShow Output.
The Cisco.com and Proxy Server Credential Profile dialog box appears.
Step 5 Enter your Cisco.com username and password in the Cisco.com and Proxy Server Credential Profile
dialog box
If you enter Cisco.com credentials in this workflow, these credentials are valid only for that session.
Device Details Deployed Devices Contains detailed job results for each device in a table:
• Device—List of devices on which the job ran.
• Status—Status of the device deployment (success or failure.)
• Protocol Used—Protocol used for the device.
• Message
–
If the job failed on the device, the reason for failure appears.
–
If the job succeeded on that device, the message Deploy Successful
appears.
You can filter the devices by selecting a status and clicking Filter.
This page displays the number of rows you have set for display in the Rows per
page field. You can increase the rows up to 50 on each page. You can navigate
between the pages of the report using the navigation icons at the right bottom of
this table.
Click the device name link to view the details of command sets and commands on
the device. Go to
Step 3 for details.
You can view the output of all the commands for all the devices by clicking the
Print button on the top right hand corner of the NetShow Job Details Page.
Pending Devices Displays the list of devices that are awaiting command deployment.
Not Attempted
Devices
Displays the list of devices on which the job has not attempted to deploy
commands.
Work Order Displays the Job Work Order. It contains the same information as the work order that appeared when the
job was created.
For retried jobs, job definitions are not updated. For such jobs the original job definitions are retained. See
A sample Job Work Order is: for details.
Page/Folder Description