Filter
Top Products
9-75
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
At the time of disabling login authentication or enable mode authentication, these fields are optional.
While disabling login authentication or enable mode authentication, if username and password are not
provided, then the corresponding fields in DCR are cleared and left blank.
This may make the device unreachable. Therefore we recommend that you provide the username and
password at the time of disabling login authentication.
Telnet Password Configuration Task
You can use the Telnet Password system-defined configuration task to change the Telnet password on
devices.
This task supports the following device categories:
• IOS (including Cable devices)
• Catalyst OS
• PIX OS
For more details, see Table 9-3.
You can enter the details of this task in the Telnet Password Configuration dialog box. (To invoke this
dialog box, see
Starting a New NetConfig Job.)
For the features of system-defined tasks and a description of the features of a system-defined task dialog
box, see
Understanding the System-defined Task User Interface (Dialog Box).
For details on the NetConfig credentials configuration tasks, see Understanding the NetConfig
Credentials Configuration Tasks.
If you change the Telnet password on a Catalyst device with an RSM module using this template, the
RSM Telnet password is also changed.
The fields in the Telnet Password Configuration dialog box are:
Group Sub-group Field Description
IOS
Parameters
Vty Lines Action Select an option to enable, disable, or make no change to the Vty Line
password.
Password Enter the Vty Line password. If you select vty, change affects all device vty
lines, and Device and Credential Repository is updated with new password.
Veri fy Re-enter the Vty Line password to confirm.
Console Line Action Select an option to enable, disable, or make no change to the Console Line
password.
Password Enter the Console Line password.
Veri fy Re-enter the Console Line password to confirm.
Aux Line Action Select an option to enable, disable, or make no change to the Auxiliary Line
password.
Password Enter the Aux Line password.
Veri fy Re-enter the Aux Line password to confirm.
CatOS
Parameters
Telnet
Password
Action Select an option to enable, disable, or make no change to the telnet
password.
Device and Credential Repository is updated with new password.