Filter
Top Products
9-64
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
Trap Timeout
[1-1000 s]:
Specify the trap timeout value. This must be between
1—1000 seconds.
Trap Queue
Length [1-1000
events]:
Specify the trap queue length. the number of events that you
specify must be between 1—1000.
Inform Request Action Select to replace, disable, or make no change to the inform
request.
Inform Retries
[0-100]
Enter the inform retires. The value should be between
0—100.
Inform Timeout
[0-4294967295]
Specify the inform timeout value. This must be between
0—4294967295.
Inform Pending
[0-4294967295]
Specify the inform pending value. This must be between
0—4294967295.
CatOS Parameters Host Configuration Action Select to add, remove, or make no change to the host
configuration.
Host Enter the hostname or IP address.
Community
String
Enter the community string.
Veri fy Re-enter the community string to confirm.
ContentEngine
Parameters
Host Configuration Action Select to add, remove, or make no change to the host
configuration.
Host Enter the hostname or IP address.
Community
String
Enter the community string.
Veri fy Re-enter the community string to confirm.
SNMP Security Select the SNMP security method.
PIX Parameters Host Configuration Action Select to add, remove, or make no change to the host
configuration.
Host Specify an IP address of the SNMP management station to
which traps should be sent and/or from which the SNMP
requests come. You can specify up to five SNMP
management stations.
Interface Select the interface:
• Inside [default]
• Outside
Group Sub-group Field Description