Filter
Top Products
8-82
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 8 Archiving Configurations and Managing Them Using Archive Management
Baseline Template
A message appears,
Successfully created the template BaselineTemplateName.
Where BaselineTemplateName is the name of the Baseline Template.
Step 8 Click OK.
If you want to add one more commandset repeat this procedure from Step 4.
Step 9 Click Finish.
A message appears,
Do you wish to save the changes?.
Step 10 Click OK.
A message appears,
Successfully created the template.
Step 11 Click OK.
The Baseline Configs window appears with all the available Baseline templates.
Creating an Advanced Baseline Template— Example
Example 1
This is a procedure to create a Baseline template to disable CDP on an interface that belongs to a specific
subnet.
Step 1 Select Resource Manager Essentials > Config Mgmt > Archive Mgmt > Baseline Templates.
The Baseline Templates dialog box appears.
Step 2 Click Create.
The Select Creation Mode dialog box appears.
Step 3 Select Advanced and click Next.
The Create a Baseline dialog box appears.
Step 4 Enter the following information:
Field User data
Template Name DisablingCDP
You can enter only alphanumeric characters up to 254 characters. Do not enter any special characters
except underscores.
Device Type Routers
Description Baseline Template for DisablingCDP
Commandset Option
Name PrerequisiteCheck.
You can enter only alphanumeric characters up to 254 characters. Do not enter any special characters.
This includes spaces, underscores and hyphens.