Filter
Top Products
10-28
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 10 Editing and Deploying Configurations Using Config Editor
Opening an External Configuration File
You should replace [msg] with actual value.
Baseline Configuration Editor
You can use this feature to edit the Baseline template of the configuration file.To do this:
Step 1 Select RME > Config Mgmt > Config Editor> Config Files.
Step 2 Select Baseline in the Selection Area page.
Step 3 Click Go.
The Baseline Config dialog box appears.
Step 4 Select the required devices using the Device Selector.
Step 5 Click Next.
The Baseline Template window appears with the following details:
Step 6 Select a Baseline template based on the device type.
Step 7 Click Finish.
The Baseline Configuration Editor dialog box appears.
Step 8 Edit the text area. (The upper section contains only non-credential commands and is called the text area.)
Step 9 .Enter comments for change in baseline in the Change Description field.
Step 10 Select any of the following:
• Save to save changes to the configuration file.
• Undo All to undo editing or typing changes.
• Replace All to replace a string in the opened configuration files.
• Tools... to launch the Config Editor tools.
• Close to close the Config Editor window.
Opening an External Configuration File
You can use this feature to associate a device with the selected configuration file from an external
location (other than archive) in the server. The file appears in either a Raw or Processed mode, based on
your preferences.
For example, if you associate the selected configuration to an IOS device in the Processed mode, then
the given configuration is processed based on the IOS rules defined in RME.
Column Description
Baseline Name Name of the Baseline template.
Description Brief description about the template.
Created On Date on which the template was created.