Filter
Top Products
11-23
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 11 Using NetShow Commands
Assigning Command Sets
• Showing Assigned Command Sets
• Assigning Command Sets to Users
• Assigning Custom Command Execution Privilege
Showing Assigned Command Sets
You can view the list of user-defined Command Sets assigned to a particular user using this feature.
To show the assigned Command Sets:
Step 1 Select Resource Manager Essentials > Tools > NetShow >
Assigning Command Sets.
The Assigning Command Sets page appears with the Assign Command Sets window.
Step 2 Enter the username in the Username field and click Show Assigned.
The username must be that of a valid CiscoWorks user. If RME has been registered with a Cisco Secure
ACS Server, then the username must be that of a valid ACS user.
The Command Sets assigned to this user appears in the Selected User-Defined Command Sets pane in
the Assign Command Sets window.
Assigning Command Sets to Users
To assign Command Sets to users:
Step 1 Select Resource Manager Essentials > Tools > NetShow > Assigning Command Sets.
The Assign Command Sets dialog box appears.
Step 2 Enter the username in the Username field.
Step 3 Select the Command Sets that you want to allocate to the user from the Available User-Defined
Command Sets list and click Add.
The selected Command Sets appear in the Selected User-Defined Command Sets list.
Step 4 Add all the required Command Sets to the Selected User-Defined Command Sets list box.
Step 5 Click Assign to assign the Command Sets access privileges to the specified user.
For a specified user to see the assigned Command Sets, enter the username in the Username field and
click Show Assigned.
The Command Sets assigned to the user appear in the Selected User-Defined Command Sets list.
Assigning Custom Command Execution Privilege
You can assign custom command execution privilege to selected users, using the Assigning Command
Set feature. You can assign this privilege to one or more users. These users can enter custom commands
while creating NetShow jobs only if this privilege is enabled.