Filter
Top Products
9-36
User Guide for Resource Manager Essentials 4.1
OL-11714-01
Chapter 9 Making and Deploying Configuration Changes Using NetConfig
Using System-defined Tasks
For the features of system-defined tasks and a description of the features of a system-defined task dialog
box, see
Understanding the System-defined Task User Interface (Dialog Box).
The fields in the CDP Configuration dialog box are:
Group Sub Group Field Description
Common
Parameters
Run Action Select to enable, disable, or make no change to the
CDP state.
Hold Time Seconds (10-255) Enter holdtime in seconds.
The CDP holdtime specifies how much time can
pass between CDP messages from neighboring
devices before the device is no longer considered
connected and the neighboring entry is aged out.
Value must be greater than value in Update Time
field.
Set to Default Select this for the default hold time of 60 seconds
Update Time Seconds (5-254) Enter time between CDP updates, in seconds.
Value must be less than value in Hold Time field.
Set to Default Select this for the default update time of 60
seconds
CDP Version Run Select the CDP Version (CDPv1 or CDPv2. CDP
version 2 is the default value.
If you are modifying the CDP Task and you do not
want to change this field, select No Change.
IOS Parameters No category-specific
commands.
- This device category does not have any
device-category-specific commands. Use the
Common Parameters group to assign the values.
CatOS
Parameters
Mod/Ports Mod/Ports
(Ex:2/1-12,3/5)
Enter modules and ports on which to enable or
disable CDP.
You can enter a single module and port or a range
of ports, for example, 2/1-12,3/5-12.
All mod/ports Select to enable or disable CDP in all ports in all
modules.
CDP Format Format The options are:
• No Change (Does not allow you to make any
modifications to the specified CDP format.)
• MAC
• Other
Select the required option.
CE Parameters No category-specific
commands.
- This device category does not have any
device-category-specific commands. Use the
Common Parameters group to assign the values.